SUNTON ESP32-8048S043 (4.3" 16bit RGB LCD)

[FarmTech-esp]

i found a way to use SUNTON ESP32-8048S043 in arduinoIDE 2.3.8 and ESP32-core 3.0.6
is it possibel for you to add this in TFT_eSPI

code have timing setup and works
suton_font.zip

[FarmTech-esp]

fixed the jumping right in display now it run 100% better

esp_lcd_rgb_panel_config_t panel_config = {
.clk_src = LCD_CLK_SRC_DEFAULT,
.timings = {
.pclk_hz = 14000000,
.h_res = 800,
.v_res = 480,
.hsync_pulse_width = 4,
.hsync_back_porch = 16,
.hsync_front_porch = 8,
.vsync_pulse_width = 4,
.vsync_back_porch = 16,
.vsync_front_porch = 8,
.flags = { .pclk_active_neg = 1 },
},
.data_width = 16,
.bits_per_pixel = 16,
.num_fbs = 1,
.bounce_buffer_size_px = 800 * 10, // use 10 lines for super fast SRAM as bufferzone!
.psram_trans_align = 64,
.hsync_gpio_num = 39,
.vsync_gpio_num = 41,
.de_gpio_num = 40,
.pclk_gpio_num = 42,
.disp_gpio_num = -1,
.data_gpio_nums = { 45, 48, 47, 21, 14, 5, 6, 7, 15, 16, 4, 8, 3, 46, 9, 1 },
.flags = {
.fb_in_psram = 1
},
};
aded test files for arduino 2.3.x
SUNTON _4_8_tutch_display.zip